Power Tools
We need to conduct this inspection to ensure power tools used around the rig are being maintained and stored properly. For more information see: 29CFR1910.241-244 and American Petroleum Institute (API) Recommended Practice 54.
Locations
List each area where power tools are located. Examine the area considering each issue below.
Electrical
Electrical tools should have the equipment manufacture’s label clearly visible. Labeling should include manufacturer’s name, model #, voltage requirements, RPM, and warnings.
Inspect the cord where it attaches to the machine. There should be a solid attachment with reinforced strain relief where the wire attaches to the motor. The cord should be 3-pronged or the tool must be double insulated and clearly marked.
Grounded plugs should not have the third pin cut off.
Plugs and cords should be in good condition and free of cracks or breaks.
Fixed power tools should be mounted solidly and protected from accidental contact with the power switch.
Inspect triggers or switches to ensure that they function properly; they should not stick or remain on after release of the trigger. Power on buttons should release quickly once the trigger has been touched.
Knowledge Check Choose the best answer for the question.
3-5. Fixed power tools should be mounted solidly and protected from _____.
You forgot to answer the question!