904 Oil and Gas Well Inspection

Compressed Gas

Compatibility

Compressed gas cylinders containing different types of gases should be marked and stored separately so that they can be easily identified to avoid confusion. Stored oxygen and acetylene cylinders should have a fire resistant partition between them; if this is not possible, they should be stored 20 feet apart.

Signs and Postings

Storage racks and areas should be clearly marked with the required placards and type of gas stored in each area with appropriate warning signs.

Cylinder Inspection

Compressed gas cylinders should be clean and undamaged and the valve system functioning properly. The bottom of the cylinder should be protected from the ground and they should be inspected for corrosion, pitting, cuts, gouges, digs, bulges, neck defects and general distortion. The cylinders must be clearly marked as to contents and expiration date, and the inspection date should be current. Compressed gas cylinders that have reached their expiration date should be removed and returned to a distributor for reconditioning or disposal.

Right-To-Know Information

Community Right-To-Know laws may apply to buildings and storage sheds that would need to be marked for the purpose of emergency response. Information regarding local requirements can be found by contacting the local fire department or emergency response agency.

Knowledge Check Choose the best answer for the question.